SCANIA Tuning Files from Effective Tuning

SCANIA tuning files from Effective Tuning – if you are looking for the best chip tuning solutions and files for your SCANIA truck, you are at the right place!  Here are some of the solutions that we offer:

SCANIA DTC removal (DTC off / DTC delete)

DTC (Diagnostic Trouble Code) diagnoses issues related to your SCANIA truck. So you will need SCANIA DTC removal (diagnostic trouble code solution) when you reprogram your truck. The reason is that removing other problematic components as the EGR, DPF, AdBlue, etc. usually causes SCANIA fault codes, problems, LIMP mode, and speed restriction.

The team of Effective Tuning can make DTC delete. We do it by rewriting the settings of the ECU and permanently removing that diagnostic errors. Our DTC cleaner solution is affordable, quick, easy and 100% online no matter where your truck is based! It is suitable for all SCANIA trucks – Scania R, Scania P, Scania G, Scania S, Scania V8, and Scania XT. The best thing is that you don’t have to worry because we delete only the fault codes that need to be deleted. So there is no risk to damage the engine.

SCANIA EGT removal (EGT delete / EGT off)

The Exhaust Gas Temperature (EGT) sensor measures the temperature of the exhaust gas. Its purpose is to protect important SCANIA truck components from higher temperatures and to achieve the correct temperature for regeneration.

One of the biggest problems with the SCANIA EGT sensor is that it is exposed to extremely high temperatures. As a result, the EGT sensor might show faulty information. That leads to many issues like reduced fuel efficiency, unnecessary DPF regeneration, etc.

Fortunately, we have the right SCANIA tuning files for SCANIA EGT delete (EGT off / EGT removal). Effective Tuning’s SCANIA EGT delete service via reprogramming the ECU of your truck will prevent it from all those faults and engine damages.

SCANIA launch control

Launch control has the function to generate a quick launch from a standstill. With our ECU remapping, we will limit low-speed rpm and the power of the wheels to prevent wheel spin during launch. As a result, your SCANIA truck will maintain better traction and achieve the best possible acceleration from a standing start.

SCANIA Start / Stop off

SCANIA Start/Stop systems are made to shut down the engine, when you come to a stop at a red light, for example. Those systems aim to reduce fuel consumption and emissions. When you move your foot from the brake or clutch to the gas pedal, the engine restarts.

It sounds nice but some of the most common issues with start/stop systems are the noise and vibration when restarting and the fact they require idling the main engine while loading the DPF (diesel particulate filter) system. In addition, the biggest problem is the increased engine wear.

Happily, Effective Tuning offers great SCANIA tuning files for start/stop disable from the electronic control unit.

SCANIA swirl flaps

Swirl flaps are small valves based alongside the cylinder axle in the inlet manifold on diesel and some petrol engines. Their role is to control the fuel to air ratio.

The problems with swirl flaps are related to often leaks, mechanical issues, carbon build-up on the flaps, and easy failures of the electronic actuators and sensors that open / close the flaps.

We offer SCANIA swirl flaps removal (swirl flaps delete) by reprogramming the ECU (Electronic Control Unit) and disabling the swirl flap actuator function.

Check also the other SCANIA tuning solutions that we can provide – SCANIA Tuning Solutions from Effective Tuning!

SCANIA TUNING FILES FOR EACH SCANIA TRUCK RANGE!

You can read more about the ECU remapping services, the SCANIA tuning files, and the ECU models that our team can reprogram:

• P-series Tuning and L-series ECU Remapping
• G-series Tuning and ECU Remapping
• R-series Tuning and ECU Remapping
• S-series Tuning and ECU Remapping
• V8 Tuning and ECU Remapping
• XT Tuning and ECU Remapping

SCANIA TRUCK ECU TYPES THAT WE CAN REMAP

We, at Effective Tuning, can offer ECU remapping solutions of all SCANIA truck ECUs (electronic control units), including Motorola EMS S6, Motorola EMS S7, Motorola EMS S8, Bosch MS6.3, Bosch MS6.2, EMD1, EMD0, EMS10, EMS6, EMS7, DC1305, TRW EMS2 DXI, etc.

Contact us for more information about our innovative chip tuning files for your SCANIA truck!

CHOOSE EFFECTIVE TUNING BECAUSE…

Effective Tuning is a trustworthy chip tuning company with a team made of professionals! We are specialists in tuning and ECU remapping of SCANIA truck engines. In addition, some of the results of our chip tuning services are improved overall performance, more power, better fuel economy, better torque, etc.

Moreover, our tuning experts have a piece of great knowledge and more than 10 years of experience in the field of truck tuning. We work according to the highest standards, so we can provide the best effectiveness of our SCANIA tuning files!

Also, we offer a wide range of add-on options to choose from. Not only that but, our prices are the best in the worldwide market! Learn more about our prices.

That’s the reason why so many SCANIA truck owners and operators choose us for their professional chip tuning partner!

Contact us today and ask about our SCANIA truck ECU remapping. Check also the solutions and benefits of our chip tuning for service shops and become a reseller/ dealer of our truck ECU remapping files.

You can also follow us on Facebook and LinkedIn for the latest news in the chip tuning and ECU remapping field!